Hire Catalogue

DPA d:dicateTM 4007A Omni Mic, 12 mm
FROM £35.00 EX VAT(Please note all prices are exclusive of VAT + 20% will be added to the final price)
Request a Quote
Features
- Directional pattern Omnidirectional
- Principle of operation Pressure
- Cartridge type Pre-polarized condenser
- Frequency range 10 Hz - 40 kHz
- Frequency range, ±2 dB 10 Hz - 40 kHz
- Sensitivity, nominal, ±2 dB at 250 Hz 9 mV/Pa; -41 dB re. 1 V/Pa
- Equivalent noise level, A-weighted Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))
- Equivalent noise level, ITU-R BS.468-4 Typ. 36 dB (max. 38 dB)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 70 dB(A)
- Total harmonic distortion (THD) < 0.5% up to 142 dB SPL peak
- Dynamic range Typ. 124 dB
- Max. SPL, peak before clipping 159 dB
- Switchable attenuator, filters etc. 0 dB / -20 dB
- Output impedance 200 Ω
- Minimum load impedance 2 kΩ
- Cable drive capability 100 m (328 ft)
- Output balance principle Impedance balancing with Active Drive
- Common mode rejection ratio (CMRR) > 60 dB
- Power supply (for full performance) 48 V Phantom power (±- 4 V)
- Current consumption 2.8 mA
- Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Color Matte black
- Microphone diameter 12 - 19 mm (0.47 - 0.75 in)
- Capsule diameter 12 mm (0.47 in)
- Microphone length 170 mm (6.7 in)
- Maximum output voltage, RMS 8 V
- Polarity +V at pin 2 for positive sound pressure
- Temperature range -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH) Up to 90%
- Matching tolerance (frequency response and sensitivity) ±0.5 dB
- Phase deviation for kit < 5°
Description
The d:dicate™ 4007 Omni Mic, 12 mm is a true pressure omnidirectional transducer. It has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD and is capable of handling up to 160 dB SPL peak before clipping occurs.
+ 20% will be added to your order